Hello, everyone！ We here are Office recovery and restoration Dot.Com. website, a personnel in charge.
We have been setting up our company office at Ikebukuro, Toshima ward, Tokyo, and we are an interior decorative work contractor, mainly taking charge of construction of Interior decorative finishing work・original state recovery and restoration work in all over Japan.
This time, as one of Terminology series after a certain time, by going back to the basic, we are introducing and explaining『light gage steel』once again.
I briefly do the roundup in my own way, then I am going to introduce it to you based on the construction pictures.
As this article is easy to read through, please browse it light heartedly.
Light gauge steel (LGS) is a construction material made by cold forming of thin steel.
It is widely used as a structural material of architecture.
While its weight is light, it has high strength too.
So, it is variously used in the places such as housings, commercial facilities, industrial use buildings, and so on.
The silver-colored material installed in the ceiling and wall is LGS.
The silver-colored material installed in the ceiling and wall is LGS.
「Light weight」-ness also in its term name
Compared with the conventional steel frame, it is very light.
As its transportation and construction are easy to do, it is used in a lot of construction sites.
※Conversation only here confidentially:
It is lighter than other conventional steel frames.
But, when we are asked if it is possible even for a female also can easily hold it, we will answer that, although it is relatively lighter than other construction materials.
But, whether even a female feels that she 「can hold it easily or not」, it depends on the size and length of the steel frame, and each person’s physical strength too.
LGS pillars and beams change the weights according to the cross-section area and length.
Generally, the weight of a piece of LGS steel frame varies from about a few kilograms to a few tens of kilograms.
However, it is also important in the lifting up pose and holding way.
If it is small sized, it may be easy to hold it.
But, if it is long and thick, the weight balance is sometimes difficult to keep it.
Chances are that it may be difficult only for one person to move it.
As the safety side is considered, moving it by plural persons and using appropriate equipment are recommended.
So, in the case of only one person will move or make landing it, let’s be careful!
While its weight is light, as it has very high strength too, it is suitable for a building where earthquake resistant property and durability are required.
If we briefly explain tensile strength of steel used for LGS, it seems that「Even if we hang the steel of every 1 square millimeter cross-section area like thin needle of it(=structural steel) on the steel frame of the weight about 40～55 kilograms, it will not be broken.」.
Steel material is resistant to corrosion and insect damage.
So, it will exhibit its stable performance for a long time.
As for its durability, it is usually said that the duration of life is 50～100 years.
In the case of appropriate designing and protection are applied, it is possible to use it within this range without any problems.
However, if the problems of rust and/or corrosion go fast, depending on its maintenance, the durability of life may be shortened sometimes too.
For your reference, in the case of using it as a building interior decorative groundwork, as the groundwork of a ceiling and wall, compared with wooden material, it is lighter and has more strength too.
Therefore, it is recommendable to use it, as it has a high long-term durability.
As abovementioned, LGS is light, and has high strength as well.
As you can choose one from various cross-section shape type, such as C type, L type, and so on, it is a material whose freedom of designing is very high.
As you can take column interval wider than wooden material, you can secure a large space. An open and few pillar design is possible.
As it is also easy to process it in the work site, and fine adjustment and complex shape corresponding can be easy to do too, it is suitable for curvilinear design and special interior decoration too.
In addition, as it is possible to flexibly correspond to extension, reconstruction, and renovation, it can be easily correspond to change the design in the future too.
As it is used in various buildings such as housings, commercial facilities, factories, and so on, LGS is an excellent construction material which will realize free design for wide usages.
As the reason of its high earthquake resistant property, you can also use it in earthquake frequently striking areas with ease too.
And, also as for fire breakout, it has a certain fireproofing property.
The reason why the earthquake resistant property is high is, as its name suggests, LGS is light. So, as it can control the weight of entire building, when earthquake strikes, the burden of earthquake shaking becomes small.
In addition, as steel frame has strength and tenderness together too, it also flexibly corresponds to earthquake power.
So, the damage and injury can be controlled to minimum.
We are introducing and explaining a part of construction site example.
LGS is being widely applied to the following architecture.
Housing apartment
LGS is being used as a structural material of the living space such as in single-family dwellings.
It ts light and has highly strength, multiple dwelling, and so on.
As it is light and has high strength, it is the most suitable to the building where earthquake resistant property and durability are required.
It is the work of a tenant in a commercial facility.
It is the state of making the groundwork of curved wall.
By using R processed runner (rounding corner processing) , it is possible to make a built-in gypsum board wall which has designability.
LGS is a very excellent construction material which is light, and has high strength and durability.
The freedom of designing is high, so, it is being widely used for various buildings, such as housings, commercial facilities, and so on.
As it is also excellent in earthquake resistant property and fireproofing property, it can secure safety, more and more demands are being expected continuously.
Our company is taking charge of a lot of interior decorative work and original state recovery and restoration work by using LGS.
If you are interested in these, please give us your inquiry from the following「inquiry」light heartedly!
※Please understand that we will execute construction in Japan only.
If you are considering to request us office building・tenant(shop or store）
original state recovery and restoration work, moving in work, relocation,
removal, renovation work, and so on,
please contact our company light heartedly by all means!
You can also give us your relative inquiry from SNS social media.
Please be sure to see it together.
From price quotation up to construction work completion,
our company is directly managing and doing construction work by ourselves.
Our aim is, to supply
「reasonable construction work as much as possible,
with high quality, better work service」to our customers.
If you look for interior decorative work・
Returning to original state and restoration work in Ikebukuro,
Toshima ward, please visit Office restoration Dot.Com.
〒171-0014
4th floor, Musashiya No.3 Building, 62-10, 2-chome,
Ikebukuro, Toshima ward, Tokyo
Free phone: ０１２０－９７８－２２６
Hello, everyone！
We here are Office recovery and restoration Dot.Com. website, personnel in charge.
Our company office is set up at Ikebukuro, Toshima ward, Tokyo, and we are an interior decorative construction work contractor, mainly taking charge of interior decorative finishing work・original state recovery and restoration work in all over Kanto district for you.
To those who suffered from Noto earthquake disaster in 2024,
We express our wholehearted sympathy to you.
We visited Kanazawa to have a farewell party for our staff worker the other day.
It was a two-night three-day trip, which makes our three-part introductions.
This article is「the second part」, a continuing of the last one.
If you did not read the first part, please read its blog first.
We think we are mainly introducing the sightseeing spots at Yamanaka hot spring on the second day.
The sightseeing route is,
Ayatori bridge→Kakusen-kei valley parade(river bed)→Kourogi bridge→Yuge roadway
We walked all around the entire Yamanaka hot spring.
Yamanaka hot spring
We started from the hotel at 9 am, and visited Yamanaka hot spring in Kaga city by chartered bus.
Photo spot, logo mark of Yamanaka hot spring, Yamanaka-za square
Yamanaka hot spring is a hot spring at old Yamanaka-cho, Kaga city, Ishikawa prefecture.
It is a town name of Kaga city too.
It is a historical hot spring area from old era, and occupies a place of Kaga hot spring village.
We firstly go to Ayatori bridge now.
Walking on Ayatori bridge.
Ayatori bridge is a bridge suspended over Dai-shouji river, and, to be exact, it is used as pedestrian bridge.
This bridge is unique S-shaped.
Because of its undulated unique steel bone shape, it is described「like playing cat’s cradle」, which was thus named.
Its shape and beautiful red and purple color has a modern of what we cannot find anywhere else.
The total length is 94.7 m, and the width is 1.5 m, which is a bridge only for pedestrians.
The view sight of Kakusen-key valley from which we can see, can be really suiting to call as superb.
Crossing Ayatori bridge, we go on sightseeing along Kakusen-kei valley walkway.
River bed
Walking toward Kourogi bridge along Kakusen-kei valley walkway, there is a resting place on the way.
Kakusen-kei valley river bed is, located between Ayatori bridge and Kourogi bridge which is a resting spot and boating as the most beautiful valley and a Kakusen-kei’s the most beautiful place in Hokuriku district.
At「Kakusen-kei valley river bed」, which is boasting best as valley beauty in Hokuriku district, we can spend a while with tastes where there only exists, while watching the valley’s profound green, clear water stream, spring new green, and fall red leaves.
※Further note
Riverbed is a seat which is situated beside the river. It is a place where you can enjoy with food, drink, and tea, while hearing the river streaming sound.
The seating area is arranged at Kakusen-kei valley riverbed. When using it, the cost is \300 per head besides food and drink price.
The business hours are 9:30～16:00 from April 1 to October 31, and 10:0～15:00 from November 1 to November 30. It is closed in winter and other seasons.
After taking enough rest, we go to Kourogi bridge.
Kourogi bridge
We think we are briefly introducing Kourogi bridge.
【A historical bridge in Yamanaka hot spring】
It is a bridge sustained on Dai-seiji river in Yamanaka hot spring, which was built in Edo period. After that, it was re-built a few times. Then, the 4th generation bridge was born in 2019.
This bridge is a symbol of Yamanaka hot spring. In 1978, Higuch Kanako who mainly played as an actress in the same named TV dramas was broadcasted.
【Harmony with nature】
Kourogi bridge is a historical bridge sustained on beautiful Dai-seiji river, as well as continuing to have its dignity in the modern times too.
From the bridge, Kakusen-kei beautiful valley is expanded where continues about 1km.
We can be fully satisfied with the natural beauty in each season.
【The name origin】
There are a few possible name origin stories of Kourogi bridge. We are not certain which is correct.
However, while feeling the harmony with bridge history and nature, it is making a special place for its visitors.
We so far briefly introduced as above. We hear that Kourogi bridge is a very important bridge made of hinoki cypress wood to connect to Kakusen-kei valley.
※Further note
In addition to Ayatori bridge and Kourogi bridge which we passed this time, there is a black and decent Kurotani bridge too in Kakusen-kei valley.
What is Kurotani bridge?
It is sustained at the most downstream place in Kakusen-kei valley.
As it makes a big pool, strange shaped rock・famous water fall of added elegance are called Kurotani or black valley, and makes profound arch shape, it became to be called Kurotani bridge. In addition, it is haiku poet Matsuo Basho’s favorite place too, he used to make a haiku whenever he visited the place.
「Kurotani bridge」was changed to a stone bridge in 1935. Until that time, it had been sustained as wooden bridge. The road access to the bridge is also called「Naya road」, and it passed to Naya temple and Komatsu over ridge.
We went through Kourogi bridge, then came to a road, there was a hot spring area there.
Arong Yuge roadway
Yuge roadway, south village of Yamanaka hot spring is located at the center of hot spring, and is the roadway about 600 m from「Kikuno-yu」 to near「Kourogi bridge」.
At the both sides of roadway, there are a lot of spots where sightseeing guests can enjoy.
It consists of various categories of shops, such as Yamanaka lacquer ware born at the traditional Yamanaka hot spring, Kutani pottery traditional artifact gallery, souvenir shops, café, restaurant and so on.
Our recommendable shops among them are:
①Yamanaka tasty place Kompa-tei・Hashizume-an：Restaurant where you can taste Yamanaka dishes「Yamanaka soba noodles」
②Meat Izumi-ya: Restaurant where you can enjoy dishes of using specialty meat
③Home-made rice cracker・Dango kokoya: Shop where you can enjoy hand-made confection
④Yamanaka lacquer ware Otakara-kura: selling Yamanaka lacquer ware and having exhibition area
In addition, along south village Yuge roadway, there is a hot spring village where it is good for loitering.
①Lacquer art Bunpei-dou: Old lacquer shop descending Yamanaka lacquer tradition to now.
②Orgel house: Facilility you can enjoy with hand-made orgel
Minami-machi Yuge roadway is a hot spring street fitting nicely for a slow walking.
There is a vast charming splendid view of village street full of nature all around, and while touching hot spring emotion, you can enjoy walking around.
Please visit the place by all means!
We had tasty lunch at the hot spring village!
Location: Yamanaka hot spring minami-machi ヨ1, Kaga city, Ishikawa prefecture
Business hours: 10:0～17:00
9：00～15：00（Thursday only）
10:00～18:00(year end, New year)
Opens all the year
Rice wine club selling place
Raw fish set lunch
As it is rice wine shop and food and drink restaurant, it is possible to buy liquor instantly and enjoy drinking it.
This time, while drinking Kaga rice wine「Kagatobi」in sake cup, we had raw fish set menu together. Hand-made tsukudani, fresh raw fish and so on, all of the menu were tasty, particularly fresh prawn was chewy and exquisite.
After lunch, then we got on the bus, and returned to the hotel again.
As we walked very much and also drank sake, we were fast asleep dreaming in the bus.
We arrived at the hotel, and had some rest, then we moved to Kanazawa castle park on foot.
Location: 1-1, Marunouchi, Kanazawa city, Ishikawa prefecture
Business hours: 8:00～17:00
Light-up: Sunset～21:00
Opens all the year
Light-up event of「Light festival」which was made by the collaboration with teamLabo was held at Kanazawa castle park at night.
teamLabo is doing an art project called「Digitized City」. It is a project of changing the building and the field by non-physical digital technology into art space as it is, not by physically changing it, but by fully using digital technology.
We are introducing a few products with catchphrase this time.
Flowers living in Kanazawa castle stone wall, and animals surviving together
Flowers resembling creature are vividly projected on the stone wall.
catchphrase
「Animals are made by flowers continuing birth and death with the stone wall. Flowers are slowly changing in bloom according to the seasons. After animal flowers are scattered and gone, its animals will die and vanish.」
Trees hailing each other
There are flowers of trees here, and lights are attached on the trees, so you can enjoy watching the clear view.
Walking there, we felt as if we were not in this world, but were straying into fantastic space.
Catchphrase
「Trees are sparkling. Tree lights are independent each other, and the lights are on and off as if breezing slowly. The lights on the trees change colors as people go by, and make special sound as the colors. The tree lights are propagated to nearby trees one by one. While it makes sound, it goes on continuing. If lights come up from trees afar, it means that there are people over there. People are probably recognize their existent in the same space usually.」
Besides, there are egg shape shining balloon jumbling area, area of let drawn picture reflect screen by using special projector and move it, an area where you can communicate, and so on. We could thus experience teamLabo’s awesomeness.
※The collaboration event with teamLabo was held from September 30 to November 20 in 2023.
The usual light-up
We moved to Kanazawa station after Kanazawa castle park next. Then, it is our introduction of long awaited dinner time.
Location: Sun rose Kata-machi 6F, 2-24-11, Kanazawa city, Ishikawa prefecture
Business hours: Monday～Thursday, Sunday：18:00～3:00
Friday, The day before holiday：17:00～4:00
Saturday：17:00～5:00
Holiday：17:00～3:00
Opens all the year
Sushi of meat covered all over
We ordered a course menu with abundant kinds of liquor and soft drink of all-you-can-drink, so the dishes are served on and on by using much meat richly. Then finally, satisfying gorgeous meat sushi was served.
The enjoyable party temporarily came to an end, then, some returned to the hotel, the others went to a next drinking place. Thus, the second day ended.
We went sightseeing around Yamanaka hot spring on the second day.
Going through Ayatori bridge and Kakusen-kei valley promenade, we crossed Kourogi bridge, then moved to Yamanaka hot spring Yuge roadway. Then, we went sightseeing at Kanazawa castle park.
At the riverbed in Kakusen-kei valley, while being satisfied with seeing the beautiful valley scene, we could enjoy seated for a while with tea.
Kanazawa castle park which we visited in the evening was accidentally holding teamLabo collaboration event of「Light festival」, where we were satisfied with spending a while that we cannot think it to be a reality.
Please be sure to read the coming third part by all means!
※Please understand that we will execute construction in Japan only.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you are considering to request office building
・tenant(shop or store）original state recovery and restoration work,
moving in work,relocation, removal,reform work,
and so on to us, please contact our company light heartedly by all means!
You can also give us your relative inquiry from SNS social media.
Please be sure to see it together.
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves.
Our aim is, to supply「reasonable construction work as much as possible, with high quality, better work service」to our customers.
◆If you look for interior decorative work・Returning to original state and restoration work in Ikebukuro,Toshima ward, please visit Office restoration Dot.Com.◆
〒171-0014
4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
We have been setting up our company office at Ikebukuro, Toshima ward, Tokyo, and we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing work・Original state recovery and restoration work in all over Kanto district for you.
This time, we are introducing and explaining a construction situation in Saitama prefecture. It is a new interior decorative work of a certain tenant.
The interior decorative groundwork construction in the tent property is a very important process for finishing the space of shop, store, office and so on wonderfully.
We can realize a beautiful finishing result and long-term durability by doing the groundwork construction well.
Firstly, we are explaining the purpose of groundwork construction.
Groundwork construction is a work operation of neatening the surface of wall, floor, ceiling and so on evenly.
The main purposes of groundwork construction are as follows:
We install stud. What is erected vertically against runner is stud.
The above is the basic flow of light steel groundwork construction procedure.
Light steel groundwork is a suitable material for tenant interior decoration which requires durability and stability.
For its construction, as the specialized knowledge and experience are necessary, we recommend you to request a well experienced construction contractor.
※Please understand that we will execute construction in Japan only.
If you are considering to request us office building・tenant(shop or store）
original state recovery and restoration work, moving in work, relocation,
removal, renovation work, and so on,
please contact our company light heartedly by all means!
You can also give us your relative inquiry from SNS social media.
Please be sure to see it together.
From price quotation up to construction work completion,
our company is directly managing and doing construction work by ourselves.
Our aim is, to supply
「reasonable construction work as much as possible,
with high quality, better work service」to our customers.
If you look for interior decorative work・
Returning to original state and restoration work in Ikebukuro,
Toshima ward, please visit Office restoration Dot.Com.
〒171-0014
4th floor, Musashiya No.3 Building, 62-10, 2-chome,
Ikebukuro, Toshima ward, Tokyo
Free phone: ０１２０－９７８－２２６
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office has been setting up at Ikebukuro, Toshima ward, Tokyo, and we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing work・Original state recovery and restoration work in all over Kanto district for you.
Regarding anything on the interior decoration, please take counsel with us light heartedly!
When you are renting a property, many tenants naturally encounter as a contract condition is「Original state recovery and restoration work」.
However, it is important to understand what this terminology points on earth, and what it really means.
We are explaining Original state recovery and restoration work of tenant property in detail in this article.
At the office, the state of executing the interior decorative decommission accompanying original state recovery and restoration.
Original state recovery and restoration work is a work of returning the rental property to the state of original situation before entering in the rental property which has been agreed in the contract as the contract condition.
Specifically, it is pointed to be a work of repairing and restoring the change and/or hurt of the property occurred in the property of the exterior and interior decoration and the equipment, before moving in or when leaving the rental property.
This work is the measures for maintaining good situation when the property owner will provide the property to the next renter.
The contents which include original state recovery and restoration work are different depending on the property situation and the contract condition.
However, the following items are included in general:
１． Repair and restoration of the exterior decoration and interior decoration
Repair and restoration of the wall and floor, repair and mending of the paint, repair of fixture and window, and so on are included.
２．Removing equipment and instrument
Removing and decommissioning furniture, equipment, instrument, and machinery which the former property renter installed will be carried out.
３．Repair and remedy of piping and wiring
It is done if repair and/or change of water service pipe and electric wiring are required.
４．Cleaning work operation
Cleaning work operation inside and outside of the rental property is carried out, so the waste will be removed.
５．Other repair and restoration work operation
Repair of the door, window, waterproof work, repair and remedy of outside wall, and so on are included.
Because original state recovery and restoration work is, decided between the property owner and the renter as the contract condition, the renter should observe the contract contents.
In addition, when the renter will leave the property, by executing original state recovery and restoration work, chances are thar it may make the requirement of receiving the return of deposit money.
Furthermore, when providing the property to the next renter, by maintaining good situation, it will play a role of maintaining the owner’s good reputation and the property value too.
Tenant property original state recovery and restoration work plays an important role as the property contract condition.
By checking the property situation before the renter’s moving in and when leaving, then carrying out the necessary repair and restoration, the renter’s smooth moving in and leaving are realized. As the result, it is possible to maintain the property value.
When leasing a property, it is important to grasp the points of this original state recovery and restoration work in advance.
※Please understand that we will execute construction in Japan only.
If you are considering to request us office building・tenant(shop or store）
original state recovery and restoration work, moving in work, relocation,
removal, renovation work, and so on,
please contact our company light heartedly by all means!
You can also give us your relative inquiry from SNS social media.
Please be sure to see it together.
From price quotation up to construction work completion,
our company is directly managing and doing construction work by ourselves.
Our aim is, to supply
「reasonable construction work as much as possible,
with high quality, better work service」to our customers.
If you look for interior decorative work・
Returning to original state and restoration work in Ikebukuro,
Toshima ward, please visit Office restoration Dot.Com.
〒171-0014
4th floor, Musashiya No.3 Building, 62-10, 2-chome,
Ikebukuro, Toshima ward, Tokyo
Free phone: ０１２０－９７８－２２６
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is set up at Ikebukuro, Toshima ward, Tokyo, and we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing work・Original state recovery and restoration work in all over Kanto district for you.
Please talk with us anything on the interior decorative work.
What we are introducing and explaining today is,
「Safety countermeasure when executing work」
In order to proceed work safely, various factors are important.
The points of safety countermeasure of its elementary contents compiled are as follows:
安全第一に
In the construction site, it is important to make a plan of safety and sanitation management in advance, and to execute it thoroughly.
When planning it, let’s include countermeasures for emergency situation and confirming necessary safety equipment.
It is indispensable to check out the equipment and tools for using the construction regularly.
By using them in normal situation, it is possible to protect from an accident and a trouble during the work operation before happening.
When operating at the high-place, it is particularly important to take safety countermeasure.
By wearing appropriate safety belt, installing handrail and so on, let’s do not neglect countermeasures in advance.
Upon proceeding the construction, let’s confirm the using construction method and the materials.
Selecting the right construction method will lead to protect from ocuring an accident.
Let’s carry out training, so that all the staff work workers can predict possible danger and can appropriately cope with it.
Quick decision will defend from an accident before happening.
If the temperature condition changes, it is necessary to adopt a measure to correspond to it.
Let’s try best to take suitable measures against rain and wind.
By doing five-point thoroughness of 5S, namely sorting・setting-in-order・shining・standardizing・sustaining the discipline, we neaten the environment of work operation.
By doing these, we can expect to go up efficiency and defending from an accident.
By sharing unsafe incidents among staff workers, and sharing the information, we will keep the safe environment.
By grasping health situation of staff workers, and securing suitable rest and nutrition, we will defend an accident suffering from ill health.
Let’s carry out basic education on safety to all of the staff workers.
By sharing right knowledge, it is possible to minimize outbreak of the danger.
Smooth communication in the work operation site is inevitable for preventing an accident in advance.
Let’s care for sharing the information and cooperation.
If a staff worker’s accident occurs, clarifying the process for taking quick and suitable countermeasure and all of the staff workers grasp it in advance are important.
By observing all of these above points, it is possible to secure the safety in the construction site, and protect staff workers’ health.
Let’s consider to take enough safety countermeasure in order to proceed the construction smoothly.
For construction site safety, it is inevitable to take planned countermeasure and cooperation of all of the staff workers.
Let’s always pay attention to safety and have a posture to be able to cope with a predictable risk.
Maintaining safe work operation environment not only directly links to success of the project, but also links to the health and happiness of all the persons connected.
Let’s share the thought of safety first, and always try best to prevent from danger before happening every day.
Safe construction will lead to reliance and high quality, and will make a part of establishing better work environment.
※Please understand that we will execute construction in Japan only.
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
If you are considering to request us office building・
tenant(shop or store）original state recovery and restoration work, moving in work, relocation, removal, reform work,
and so on, please contact our company light heartedly by all means!
You can also give us your relative inquiry from SNS social media. Please be sure to see it together.
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves. Our aim is, to supply「reasonable construction work as much as possible, with high quality, better work service」to our customers.
◆If you look for interior decorative work・Returning to original state and restoration work in Ikebukuro,Toshima ward, please visit Office restoration Dot.Com.◆
〒171-0014
4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is set up at Ikebukuro, Toshima ward, Tokyo, and we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing work・Original state recovery and restoration work in all over Kanto district for you.
Please talk with us anything on the interior decorative work.
Have you ever heard of a term of pre-cutting in the interior decorative work?
Pre-cutting is pointed to be, cutting the materials properly to the required measurement in advance in the architecture and the interior decorative work.
This skill greatly contributes to construction efficiency and accuracy improvement.
In this article, we are explaining the significance of pre-cutting, its merits, and also the key of efficient construction and so on in the interior decorative work.
Pre-cutting is pointed to be, properly cutting various materials to their required measurement in advance which will be used in the architecture and the interior decorative work.
Wood, metal, plastic and others are included as these materials.
By pre-cutting, processing work operation and adjusting work operation in the construction site are greatly reduced, and processing stage efficiency is planned.
●Shortening the time period
As it is possible to reduce process work operation at the construction site to the necessity minimum, shortening the work period can be planned.
●Enhancing accuracy
As it is done by using machines in the factory, it is possible to process the materials to high accuracy.
●Reducing cost
By saving work operation time and reducing waste materials at the construction site, it is possible to cut down the cost.
Wall panel is a general material in the interior decorative work.
By carrying the pre-cut materials which were cut in advance according to the wall panel measurement to the site, and assembling them, prompt construction will become possible.
Accurate measurement is required for laying flooring.
In the construction site, it is possible to lay pre-cut flooring at the construction site in a short time, so the work operation efficiency will go up.
In the interior decorative work, chances are that fabrication furniture such as counter, shelf, and so on are sometimes required.
The furniture is made by using pre-cut materials in the factory, then is carried to the site, quick construction will be possible.
As pre-cut materials are processed in the factory, the measurement accuracy is required.
Let’s confirm the measurement before the construction and revise it if required.
It is also important to select the materials which are suitable to pre-cutting.
Considering its processing property and durability, let’s select the proper material.
Delivery management of pre-cut materials is also important.
In the work process planning, by managing pre-cutting work operation schedule properly, let’s defend delaying work period.
【Plan thoroughness】
Advanced planning is indispensable before pre-cutting.
By grasping the material kind, measurement, quantity and so on precisely, we request the factory to process them.
【Proper machine selection】
As pre-cutting is done by using the machine, selecting the proper machine is important.
Let’s select the most suitable machine according to the processing material and measurement.
【Smoothing communication】
Smooth communication with the factory is important.
By telling the process content, its delivery time and so on, let’s realize smooth pre-cutting!
In the interior decorative work, pre-cutting is one of the important methods to realize an efficient construction.
By planning thoroughly, selecting machines properly, and smoothing the communication, it will be possible to do efficient pre-cutting.
Toward improving productivity and quality at the construction site, how about trying to utilize pre-cutting ?
In the interior decorative work, pre-cutting is an important method to realize efficient construction.
The materials which were properly cut to the accurate measurement will enable a fast and accurate work operation in the construction site, and will contribute to work process efficiency and reducing its cost.
While considering various factors such as planning ideas appropriately, selecting materials, managing delivery time, and so on, let’s utilize pre-cutting and realize to enhance the quality and shorten the work period in the interior decorative work!
※Please understand that we will execute construction in Japan only.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you are considering to request us office building・tenant(shop or store）original state recovery and restoration work, moving in work, relocation, removal, reform work, and so on, please contact our company light heartedly by all means!
You can also give us your relative inquiry from SNS social media. Please be sure to see it together.
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves. Our aim is, to supply「reasonable construction work as much as possible, with high quality, better work service」to our customers.
◆If you look for interior decorative work・Returning to original state and restoration work in Ikebukuro,Toshima ward, please visit Office restoration Dot.Com.◆
Japanese version↓
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is set up at Ikebukuro, Toshima ward, Tokyo, and we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing work・Original state recovery and restoration work in all over Kanto district for you.
On any of interior decorative work, please take counsel with us!
We are introducing and explaining gypsum board in the blog this time.
Nowadays, as one of the indispensable materials for architectural interior decorative work, we thought we would like to research gypsum board more in detail, so we coordinated the following article.
Picture quoted from Yoshino Gypsum Co. Ltd.
Picture quoted from Yoshino Gypsum Co. Ltd.
Gypsum board is a kind of construction material used for wall and ceiling finishing, and reinforcement in the construction and interior decorative work.
Generally, it is also called as「dry wall」or「gypu board」.
Gypsum board has different common names in countries and areas.
As there is a possibility of difference in the areas, when confirming a name used in particular area, kindly try to check its own naming.
●Dry wall
In many countries such as USA, Canada and others, it is called as「dry wall」.
This name derives from dry type construction process of gypsum board.
●Gypsum board
「Gypsum board」is related to the main component of gypsum.
This name is general in the world.
●Plaster board
It is called 「plaster board」in England and some English speaking countries.
This name derives from the fact that plaster was used for wall finishing before.
●Wall board
It is called「wall board」in some areas.
This name is related to be used for wall finishing material.
●Board rock
It is sometimes called「board rock」in Japan and some countries.
This name is a common general naming for pointing gypsum board.
●Construction plaster board
It is also called「construction plaster board」in some areas.
It is a name often used in the construction industry.
Firstly, the main component of gypsum board is, a mineral raw material (calcium sulfate dehydrate) called gypsum.
This gypsum is the main material of gypsum board. By hardening it, it constitutes solid board shaped structure.
Its structure consists of two paper sheets sandwiched gypsum center layer usually.
Generally, its thicknesses are various sizes from 1/4 inch to 5/8 inch.
Main general size is 4×8 feet.
Gypsum board is used for wall and ceiling interior decorative material. In order to finish the room space inside, it plays a role of base material for painting and sticking on tyles, wall papers and so on.
In addition, it is also used for partition wall, sound insulating wall, fire resisting wall and other structure construction.
Characteristic:
Gypsum board is relatively light and easy to handle, so it is being generally used in the interior decorative work very much.
It is possible to use various kinds of gypsum board in the market, so it is important to select appropriate kind according to the content of interior decorative work.
1.Interior decorative finishing of the wall and ceiling
Gypsum board is the most used for the interior decorative finishing of wall and ceiling generally.
It is used to combine with joint compound, and makes smooth surface.
By doing this, it is ready to fit wall paper, other decorative material and/or to paint.
2.Screening
Gypsum board is used for hiding electricity wiring, piping, heat insulating material and so on in the wall.
It is possible to place wiring and piping without opening the wall, so it provides functional screening, while keeping beautiful sight.
3.Fire resisting property
Some gypsum board has fire resisting property, so it plays a role of delaying fire expansion.
This is important for commercial facility, multi-family residence and so on.
Using example: Fire resisting gypsum board is used at the office building partition wall, so it is securing safety to prepare for fire breakout in case.
4.Sound insulating property
Gypsum board excels in sound insulating property. By using it at the wall or ceiling in interior decoration, sound transmission is controlled. This characteristic is suitable for using it at the apartment and office building.
Actual usage: On the wall of art studio, a kind of gypsum board of high sound insulating property is installed, so noisy sound outside is controlled as much as possible, and is providing creative environment.
5.Light weight property and easy handling
Gypsum board is light, so handling it is easy. For this reason, quick progress of interior decorative work process becomes possible.
Example: In DIY(do-it-yourself), installing gypsum board and handling are easy, so new wall surface can be made quickly.
Because of its various usage and excellent characteristics, gypsum board is one of the indispensable construction materials in the modern interior decorative industry.
From interior decorative finishing up to screening, fire resisting property, and sound insulating property, it is bringing into high effectiveness by various usages.
When planning interior decorative work, considering gypsum board utilizing method is an important process.
Chances are that the ways of using gypsum board are different according to work kinds and requirements.
In interior decorative work of big scale decorative renovation work or that with special requirement, it is important to receive an advice from its specialist.
Please also refer to the blog here.
On gypsum board and rock wool sound absorbing board
What is sound absorbing board？ Difference from sound insulating board.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you are considering office building・tenant(shop or store）original state recovery and restoration work, moving in work, relocation, removal, reform work, and so on, please contact our company light heartedly by all means!
You can also give us your relative inquiry from SNS social media. Please be sure to see it together.
From price quotation up to construction work completion,
our company is directly managing and doing construction work by ourselves.
Our aim is, supplying
「reasonable construction work as much as possible, and high quality, better work service」
to our customers.
◆If you look for interior decorative work・original state recovery and restoration
work at Ikebukuro, Toshima ward, please look for Office recovery and restoration Dot.Com.◆
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is set up at Ikebukuro, Toshima ward, Tokyo, and we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing work・Original state recovery and restoration work in all over Kanto district for you.
On any of interior decorative work in the office, please take counsel with us!
This time, we are explaining【Renewal work】at a construction site of apparel tenant(shop) in an outlet.
What is renewal？
Renewal means, making an old thing renew, or re-make.
When renewing shop or store, building, this word is used with re-decoration and refurnished opening.
When doing renewal, chances are that sometimes a large scale work is executed, renewing its function and/or design, or changing its layout too.
Then, when is the timing of doing renewal work?
If you continue to manage running a shop or store for a long time, due to the shop or store deterioration, its maintenance and cleanliness renewal are not avoidable to do.
Re-decoration・extension work are good chances for renewing its inside.
Shop or store re-decoration(re-mending) and extension work are often done out of necessity. But, by doing further invention will lead you for gathering more customers. So, please consider it by all means.
We are introducing and explaining a construction site example.
This time, due to the renewal opening, we executed its interior decorative finishing work.
As it is an apparel shop, we changed the layout and others.
We made a fitting room, the place to put inventory, and a new partition wall for a resting room.
The work contents are, caring the floor, doing LGS (=light gauge steel) work, doing board work, doing putty treatment, and sticking so-called decorative cloth finishing.
It required about two months work period.
We are introducing some of the construction site pictures as follows:
The above are some of the construction site pictures.
If you are considering shop or store renewal work (re-decoration work), please take counsel with us light heartedly by all means!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you are considering office building・tenant(shop or store）original state recovery and restoration work, moving in work, relocation, removal, reform work, and so on, please contact our company light heartedly by all means!
It is also possible to give us your inquiry from SNS social media.
Please be sure to see it together.
From price quotation up to construction work completion,
our company is directly managing and doing construction work by ourselves.
Our aim is, supplying
「reasonable construction work as much as possible, and high quality, better work service」
to our customers.
◆If you look for interior decorative work・original state recovery and restoration
work at Ikebukuro, Toshima ward, please look for Office recovery and restoration Dot.Com.◆
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
We are taking charge of「Interior decorative finishing work」「Original state recovery and restoration work」mainly in Ikebukuro at the midpoint, and in all over Kanto district for you.
This time, we are explaining a theme of,
What is OA floor? What kind of merits・demerits are there, and how is it constructed?
If you are an office worker, you may sometimes hear of the theme, however, on OA floor, if you actually asked about it, it may be hard to precisely answer that at once, so we are roughly explaining it.
画像は フリーアクセスフロア工業会 より引用。サイトはコチラ
The picture quoted from Japan Free) access floor Association website. The official website is here.
In the office, OA floor is, mainly pointed to be, so-called double flooring, which is, in order to make cable wiring such as LAN, power source and others smooth, for providing space passing wiring on the existing floor and executing work on it.
As a general name, it is also called「free access floor」and so on.
It was only used for some limited placed at server room, clean room and so on before. However, in the modern days when IT introduction advanced, it is also used in almost all the general offices.
Main merits of OA floor are as follows:
There are above features.
On the contrary, demerit points can be taken up such as:
As the biggest merit, the freedom of wiring・layout goes up.
Usually, wiring should be protected to pass on the floor with mold, or it should be considered not to interfere office staffs walking. However, by wiring under the floor and putting out the line by the desk, it decreases the possibility of stumbling, and visual neat feeling changes very much.
No possibility of stepping on the wiring or hurting it with furniture also means to protect it.
From the beginning, the reason of it made for server room and clean room is exactly for this.
If it is a light weight type, as it is also easy to remove it, it can flexibly cope with layout change too.
In addition, for just in case, non-combustible material is often used for it.
The demerit point which is the most often taken up is, in the case of installing OA floor which was executed other floor work before, the floor goes up, there may be oppressive feeling. Therefore, we usually have to install a slope.
We install OA floor on the original floor, and in proportion to the heightened, usually in order to move out big household goods and stocked goods, equipment easily, we install a slope.
For this, in the case of having installed high OA floor particularly, the slope also becomes long, and extra space is going to be necessary.
In the modern times, as most of offices are constructed in anticipation of executing OA floor as the standard, so this problem only occurs when executing work from afterwards, not in order.
On lacking of strength which we took up above demerits, as there are various kinds of OA floor too. For example, there are「pillar supporting type」which is by using jack, freely pulling up to a certain degree, which can be freely wiring below, and「placing and spreading type」which is oppositely in block state and groove is on up and down.
As to the materials, there are various kinds too. There are inexpensive resin made, strong steel made, and heavy concrete made, and so on, which are manufactured by various makers and are being sold.
At heavy places such as server room and so on, we must adopt an OA floor to be able to endure heavy load.
Recently, resin made type with enough heavy durability products have been increasing too.
If you request the relative construction, it may be good to take counsel of requiring how heavy load bearing is needed to endure the OA floor.
1.We move goods at which area OA floor will be placed, we expose the floor ground.
2.After cleaning, we make the floor neat not to have凹凸. We get rid of protrusion and the like.
3.Placing cushion sheet, we go on lining up OA floor on it. We go on cutting the connecting parts such as edge part at the site.
4.We install slope・frame.(If it is a property of originally made for OA floor use, this process is not necessary. )
5.We go on spreading in finishing materials such as tile carpet, vinyl chloride tile and so on, on OA floor.
6.Others, after inspection, we pass the property to the tenant renter.
A special adhesive which can be sticked and stripped easily is used for tile carpet for OA floor finishing.
In the server room, antistatic function added tile such as SEIDEN tile C or the like is used.
We are brieflyintroducing tenant examples which our company executed construction before as follows.
The picture of curved surface wall construction. Seeing the lower part, concrete type OA floor is visible.
In this picture, tile carpet is partly constructed at the same place.
At the same site, different place. As it is concrete type OA floor, it is not possible to change the layout easily. However, there is satisfactory durability for wiring protection.
We so far explained What is OA floor? What kind of merits・demerits there are, and how it is constructed?
Nowadays, in the general office, the case of wiring been stretched on the floor has become little. However, because of office relocation or so, at the new location, if it is not OA floor, it is necessary to request the relative new construction to a contractor.
Including OA floor, we are happy to receive your full set order of interior decorative work.
On your requests such as「I want to change the present office layout」,「as I am not satisfied with the present〇 〇, can you solve the problem?」, and so on, please take counsel and give us your quotation request light heartedly.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Let alone office・shop or store ceiling, wall repair and recovery, painting work, concerning new opening, renewal, and so on, please take counsel with Office recovery and restoration Dot.Com. light heartedly by all means.
It is also possible to give us your inquiry from SNS social media.
Please be sure to see it together.
From price quotation up to construction work completion,
our company is directly managing and doing construction work by ourselves.
Our aim is, supplying
「reasonable construction work as much as possible, and high quality, better work service」
to our customers.
◆If you look for interior decorative work・original state recovery and restoration
work at Ikebukuro, Toshima ward, please look for Office recovery and restoration Dot.Com.◆
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is set up at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing work・Original state recovery and restoration work for you.
Please take counsel on anything on office interior decorative work.
To readers of this article: When you lease a rental property, have you ever heard of the phrase「Original state recovery and restoration work」?
This phrase is pointed to be an important operation work executed before you leave the rental property.
This time, we are explaining original state recovery and restoration work in detail.
Original state recovery and restoration work is, pointed to be a remedial・repair and recovery work done, when leasing a rental housing residence.
In the case of renting a property, when moving in, the environment to live in is ready. However, before leaving it, it is required to be returned to the situation when moved in.
This is called「original state recovery and restoration」, and the work for that is called「original state recovery and restoration work」。
Because of the following reasons, original state recovery and restoration work is necessary to do:
1.Executing the contract condition: In the rental property contract, before leaving it, according to the settled contract condition, it should be returned to the original situation.
By doing original state recovery and restoration work, it is possible to execute the contract condition and to prevent to occur troubles.
2.For the following renter: If the renter before remains hurting and/or stains, as the result of original state recovery and restoration, the next renter may have to stay in uncomfortable environment.
By doing original state recovery and restoration work, it is possible to supply comfortable living environment to the next renter.
3.Refunding the deposit: In many cases, when renting a property, deposit is necessary to pay.
By doing original state recovery and restoration work and returning the property to clean situation, the deposit can be refunded smoothly.
Contents of Original state recovery and restoration work are different according to the rental property situations and contract contents.
However, as general contents, there are the following details:
●Changing wall paper and floor material
●Repairing and mending hurts and holes
●Cleaning, repairing and recovering water used areas
●Repairing and changing lighting fittings
●Repairing, painting doors and windows
Original state recovery and restoration work is, an indispensable process when renting a property.
In order to observe the contract condition, to provide comfortable environment to the next renter, and to receive the refund smoothly too, it is important to execute original state recovery and restoration work sufficiently.
By returning the property to the just moved-in state, it is possible to maintain recycling of the lease property, and to realize smooth moving-in and leaving procedure.
Please also refer to the below-mentioned blog by all means.
What is the merit of requesting original state recovery and restoration work(office・shop or store relocation) to an interior decorative work company?
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
Finally,
On office building・tenant(shop or store)
original state recovery and restoration work, moving in work,
relocarion, withdrawal, reform work and so on, if you are considering to request,
please be sure to contact our company light heartedly!
It is also possible to give us your inquiry from SNS social media.
Please be sure to see it together.
From price quotation up to construction work completion,
our company is directly managing and doing construction work by ourselves.
Our aim is, supplying
「reasonable construction work as much as possible, and high quality, better work service」
to our customers.
◆If you look for interior decorative work・original state recovery and restoration
work at Ikebukuro, Toshima ward, please look for Office recovery and restoration Dot.Com.◆
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
