Hello everyone！We here are Office restoration Dot.Com. website blog.
We are doing decorative finishing construction work professionally of 《Interior decorative finishing work》《Restoration work》, mainly at Ikebukuro area , Tokyo, also in all over Kanto area, for you.
Today, we are explaining the word of『LGS』which may be often heard at construction sites.
For those who are working at construction sites, we think that the word may be familiar to you. However, I personally was not very sure about this word very well until checking it. (I have pretended to be know-it-all about this word and have been spending days lazily.(Ashamed smile!)).
I checked well this time.
At first, this LGS↓
Metal in this picture looks like silver colored iron, doesn’t it?
It seems that this 『LGS』 is an abbreviation. The original words are,
Light Gauge Steel
or
Light Gauge Stud.
The meaning is 「light」「standard」「iron frame」, isn’t it?
This LGS is designated the material used for interior decorative work.
The above picture is a light weight shaped steel plate whose thickness is 1.6 mm～4.0 mm or so, and LGS is zinc galvanized 2 mm or so thickness of thin iron plate.
It seems that the cross section shape of C is relatively a lot. There are also groove shaped, mountain shaped, Z shaped and other shaped. It is used at buildings of steel constructed, steel reinforced concrete or so for bedding material of wall and ceiling.
The single material is a rodlike component. There are several kinds of it. Using bis or accessory to fasten it, we go on making and form into variety of complex shape.
Wall and ceiling are made by LGS. Firstly, in the case of wall bedding, roll forming zinc galvanized steel plate, the mounted product is formed by C shape cross section made stringer(=stud), beam(=runner) to set up floor surface and slab surface, spacer to prevent modification of stringer(=stud), and so on.
LGS is sometimes also used for partition wall bedding, which is called partition between light steel to another light steel too. There are sizes from 50 type～ up to100 type. When used as partition wall bedding, it is often called as stud 1, not LGS.
As gypsum board is sticked on LGS, and further sticked wall paper(or cloth), so it is usually invisible.
Ceiling bedding mounted by LGS is called light ceiling.
LGS is mainly used for construction of steel structure reinforced concrete building, However, in recent years, it has been also used for wooden residence.
A big difference between LGS(=light steel structure) and wooden structure is if there is typical wood made crook, curb, or crack, and construction workability is good, or not. So, it is often used for housing apartment, office, shop or store, and so on, for many places.
We explained the point of what is LGS on earth so far as above. Did this let you understand well for your reference?
As our company is receiving a lot of LGS work requests, and our relative construction performance so far is abundant.
If you are looking for construction work contractor which is willing to respond to construction period or so flexibly, we are especially happy to accept your work request in Kanto area, please be sure to consult with our company.
On 『Office renewal・shop or store renewal decoration』and its interior decorative finishing work・restoration work and so on, if you are in trouble or worried, please feel free to give us your inquiry in the first place.
Please follow up of our Instagram, Twitter, and Facebook light heartedly.
From price offer to construction decorative finishing work, our company is directly managing and working by ourselves, so we are aiming to supply「most reasonable, high quality and good products」 to you.
～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★
★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★
Our address: 〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo
Free phone: 0120-978-226
～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～
Hello！We are Office restoration Dot.Com. website blog.
Today, we are explaining【marking base line work】.
What is marking base line work?
Is it related to calligraphy using Japanese ink?
We would like to briefly explain to those who do not know about it well.
Marking base line work seems to be considered one of the important operation works to grasp design drawing and actual position. From the start to the end, it is connected with each site, and it is also related to various works.
It is a kind of operation work to write out necessary various base lines for the work on site ground and others.
We will explain especially for those who do not understand base lines,
It is base line to be when dividing measurement, placement and so on for design and processing of building and work piece and others, We measure the size from this line.
Two technical workers cooperate, and the one holds the base point, the other draw the ink line by prolonging the inked thread.
Writing out center line of pillar, wall and others is called 「centering」.
When marking base line work, dipping thread in ink pot and the like, and undip the thread, then you can draw straight line.
There are many kinds of ink pot(=operating tool), for your reference↓
We would like to explain kinds of marking base lines as follows.
・Land marking base line ink: ink to indicate horizontal line to make level standard on each floor.
・Center marking base line core ink: ink to indicate, becoming center place of pillar or wall.
・Return marking base line ink: ink at certain constant distance indicating actual distance(for example 1 m or 0.5 m) when unable to mark on concrete as existing of hindrance.
When marking base line, as for steel structure reinforcement work, concrete formwork, fixture work, metal work and so on, for many kind of works, the design drawing is drawn as actual size.
For this operation work, the right highly precisional positioning in accordance with the design drawing is required.
Nowadays, lightening laser by laser irradiator, the method of marking along the base line is also exercised.
Using laser by laser irradiator, it is easy to check if building pillar・wall・ceiling and others are at right angle and horizontal.
Did you understand above of our explanation even a little?
Marking is a necessary operation work for writing out various base lines.
In the event of making building, marking base line is an important process concerning from the start to the final.
Without exercising this operation accurately, it is impossible to construct the building properly.
When we ask our company staff worker about marking base line, the answer seems that
「In order not to arise base line gap, always be conscious of ‘’accuracy ’’ is the point of going on marking base line well.」.
That is all for our explanation today.
On 『Office renewal・shop or store renewal decoration』and its interior decorative finishing work・restoration work and so on, if you are in trouble or worried, please feel free to give us your inquiry in the first place.
Please follow up of our Instagram, Twitter, and Facebook light heartedly.
From price offer to construction decorative finishing work, our company is directly managing and working by ourselves, so we are aiming to supply「most reasonable, high quality and good products」 to you.
～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★
★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★
Our address: 〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo
Free phone: 0120-978-226
～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～
Hello！We are Office restoration Dot.Com. website.
We are doing decorative finishing construction work professionally of 『Interior decorative work』『Restoration work』and the like, mainly at Ikebukuro area, Tokyo, and also in all over Kanto area, for you.
It is the following article continuing from the last time, explaining fire outbreak countermeasures.
Then, it is the main subject about room after fire outbreak.
When you should encounter fire outbreak, what kind of reform construction work is possible varies depending on site situations.
In some cases of repairing work, there may be a possibility not to be able to fully cover the cost of damage, and necessary to consider to reconstruct the building or house.
「Is it possible to restore original situation？」
「Do not know what to do.」
If you should feel uneasy as above, there are two important matters to check!
They are「field survey」and「fire insurance」!
Why they are important, we are explaining one by one, aren’t we?
At first, it is concerning 「asking field survey for professionals」.
Whether it is possible or not for reforming(or renovation) after the building or house encountered fire outbreak, it is very difficult to judge without field survey.
We shall check the following two matters mainly in field survey.
Determining whether it is possible to reuse certain parts or not.
It is also becoming very important to judge if it is possible to carry out repair method such as reform or renovation explaining later, and what kind of method is suitable.
At the site of fire outbreak, after the end of fire, a kind of special smell burnt to a crisp of building materials and so on so-called fire smell may remain.
It is said that some people react against even only a little smell nervously, if leaving things as it may greatly affect human body.
If you consider to live in the same house continuously, it is necessary to take away fire smell.
If we hear of 「fire insurance」, it is easy to hold an image that its insurance is for preparing for fire outbreak, isn’t it?
However, there may not be many of you who do not fully grasp and understand until where fire insurance is really compensating, may there?
In order not to panic when necessity happens to arise, it is safe to precisely check in advance.
Basic rule of fire insurance is payment up to actual loss.
That is, it is not possible basically to receive amount of money more than actual loss.
Depending on the contract details of insurance, maximum amount of insurance is decided, and insurance amount only may not actually fully cover the damage cost. Guaranteed limit may be different. So, if you already bought insurance, we suggest you check the details.
When you are buying insurance, we think that you may have decided the compensate scope is whether 「building」,「household property」 or 「both of building and household property」.
In the event of requesting amount of fire insurance, required indispensable item is the picture of house encountered fire outbreak.
When you request fire insurance compensation, if the contractor has ever had work performance applying for fire insurance before, it is an encouraging matter. So, please check if there was this kind of fact before from the contractor when you consider to choose one.
Then, as to reform and renovation, there are not clear definition difference of the two words.
However, in general, 「reform」is repair for building restoration or partly repair decoration at defected place, while「renovation」 means remodeling work for adding new function or value.
In a few words,
Reform=returning to original situation
Renovation=newly remake
There are these kinds of differences as above!
And, for these two, it is not that either is better or worse, either will be changing to be chosen according to the purposes.
Then, which is more recommendable in the corresponding cases, we are going on explaining with checking merit and demerit of reform and renovation.
Reform is an often adopted work when partly repair is necessary case, not a whole building.
【Merit】
・Cost may be relatively diminished, depending on the scale of work.
・Work period is short.
・Able to still live in the site during work too, depending on the scale of the site.
【Demerit】
・「Improved interior traffic line」,「Want to add facility」and so on, it is merit and demerit especially as newly adding value of difficult work scale is limited, isn’t it?
As all these totally considered, it can be probably said that reform is suitable for a case of fire damage situation relatively small.
As for renovation, it is a large scale repair work whose work scale may extend to a whole building.
【Merit】
It is possible to change space into further easier to live in than before by enhancing function such as fire resisting property and earthquake resisting property and so on, or by changing layout.
【Demerit】
・Work cost is relatively high.
・Work period is long.
・Necessary to look for a temporal place to live in, depending on work scale and period.
There is 「skeleton reform」which is also used with the similar meaning as renovation.
Skeleton reform is a kind of work, demolishing almost all except building skeleton such as poles, base and others. It may also be expressed as「full renovation」 or 「skeleton renovation」。
To express just in a few words, it is not too much to say that skeleton reform is a step before full reconstruction, almost newly construction.
Of course, as it may be going to be more costly, understanding that there is a method of re-birth as same as newly construction work of even formerly encountered fire outbreak housing too, it seems that choice is going to be far more wider.
Then, that is all for our explanations today.
On 『Personal residence・office renewal・shop or store repair decoration』and its interior finishing decoration work・restoration work and so on, if you are in trouble or worried, please feel free to give us your inquiry in the first place.
We are waiting for your follow up of our Instagram, Twitter, and Facebook.
From price offer to construction finishing decoration work, our company is directly managing by ourselves, so we are supplying more reasonable and high quality and good products to you.
～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★
★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★
Our address: 〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo
Free phone: 0120-978-226
～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～
Hello！We are Office restoration Dot.Com. website.
We are doing decorative finishing construction work professionally of 『Interior decorative work』『Restoration work』and the like, mainly at Ikebukuro area, Tokyo, and also in all over Kanto area, for you.
In winter season, it is getting awfully dry, isn’t it?
In winter, please be cautious of fire! Understanding cause of fire outbreak and countermeasures.
Every year when winter comes, we often hear nationwide news of fire disasters reported by the press.
The other day, a fire broke out in our neighborhood area. As we were concerned about renovation and reform after fire, we checked it.
We should be careful of fire outbreak throughout the whole year. However, how about reviewing fire outbreak countermeasures at your residence again this season? In this article, we are explaining relative countermeasures and the room after fire outbreak twice separately, this time and next time.
Fire outbreak cause and countermeasures
As for the factor, as we already stated as above, drying of the air is being considered to be the utmost cause.
As for air, if the temperature is the higher, containable moisture amount becomes the more. While temperature is the lower, containable moisture amount becomes less. Therefore, during winter when temperature is relatively low, the air becomes very dry.
In addition, even if warming up dry air from originally low temperature by using heating appliances, moisture amount contained in the air does not change, so it still remains dry..
As for the factor of fire outbreak,
The biggest factor is cigarette, the followings are setting fire consciously, cooking stove, bonfire. There are various causes, aren’t there? Among these, we are especially explaining things to be noted and countermeasures of matters to be noted at your residence.
At first, in order to prevent cigarette fire outbreak, let us thoroughly check「Smoking cigarette only at safe and designated places」「Never smoke when sleeping」「Check again before going out or before going to bed」！
Especially in winter causing fire outbreak, we can point out heating appliance of stove and others.
What we should especially be cautious is fire outbreak caused by 「electric heater」. Compared with kerosene stove, the impression seems to be safe as it does not use fire for heating. However, according to the survey of Tokyo metropolitan Fire and Disaster Management Agency, in reality, the fact is that 70% or more than 70% of fire outbreak is caused by kerosene stove fire.
The best countermeasure is 「Do not put easy to burn things close to or around kerosene stove」. Furthermore, even if you are careful, by some chance, there is a possibility that cloth or easy to burn things happen to touch, or fall down near kerosene stove. So, let us be sure to definitely put out fire before going out or sleeping and the like, if you take your eyes off for long time.
Then, that is all for today.
On 『Your personal residence・office renewal・shop or store renovation』and its interior decoration work・restoration work and so on, if you are in trouble or worried, please feel free to give us your inquiry in the first place.
We are waiting for your follow up of our Instagram, Twitter, and Facebook.
From price offer to construction finishing decoration work, our company is directly managing by ourselves, so we are supplying more reasonable and high quality and good products to you.
～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★
★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★
Our address: 〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo
Free phone: 0120-978-226
～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～
Hello！We are Office restoration Dot.Com. website.
We are doing decorative finishing construction work of 『Interior decorative work』『Restoration work』and the like, mainly at Ikebukuro area, Tokyo, the midpoint and also in all over Kanto area, for you.
Before opening shop or store, or office, an important work so-called「interior decorative finishing work」 shall be carried out. Literally, it is 「a work for finishing building interior decoration」. We think that many of you may not understand well what kind of interior decoration the actual object is in details.
Today, we are thinking of explaining description of work on the「interior decorative finishing work」 in detail.
What is Interior decorative finishing work industry?
It is a kind of construction industry carrying out decorative finishing work in the buildings using wood material, gypsum board, sound absorbing board, wall paper(cloth), tatami(=straw floor mat), vinyl floor tile, carpet, fusuma(=sliding paper door), and so on.
We can point out work examples as interior work, ceiling finishing work, wall sticking work, interior decoration partition work, floor finishing work, tatami work, fusuma work, furniture work, sound insulation work.
In addition, as interior decorative work, facility work of electricity・gas・water supply・air-conditioning and so on may be included.
Timing of interior decorative finishing work
Interior decorative finishing work may start around when proceeding exterior decorative finishing work, and anxiety of rain water flooding has gone.
For this reason, when constructing tower building and the like, even if exterior decorative work is still carried out at rather upper floors, there may be a possibility of already setting about interior decorative finishing work starting from rather lower floors where exterior decoration work has already finished earlier.
Details of interior decorative finishing work
We think of going to explain a few detailed works of interior decorative finishing work which we already introduced briefly above.
Wall sticking on work
It is a kind of work to go on sticking cloth or tile and others on wall bedding.
Depending on the kind of bedding, work method may vary. In general, similar to finishing at ceiling, direct sticking work method is usual.
If space of mounting heat insulating material or so is necessary, we use horizontal material to mount on wall bedding.
Ceiling finishing work
At the ceiling, there are two kinds of ceiling materials, which are ceiling bedding material and ceiling finishing material. According to the place for usage, such as personal residence, building, office and so on, it is going to be varied.
In general, as for ceiling finishing work, we go on directly sticking gypsum board, then carry on work by finishing on light steel or wooden structured ceiling bedding.
By painting, sticking cloth, sticking on panel and decorative board and so on, we use the materials to match the site, then complete interior decoration.
In order to tolerate the weight of gypsum board, we go on firmly stretching around the mounting of wooden bedding, then strengthen its structure.
The process from wall or ceiling bedding to finishing is as follows:
Marking
Wall bedding
Ceiling bedding
Ceiling finishing
Wall finishing
Floor finishing
Others
By marking work, we mark base line, then we go on mounting bedding(=light gauge steel) to stick on gypsum board at wall or ceiling.
Interior partition work
It is, a kind of work to install partition wall at shop or store room. For partition of shop or store, or office, most popular and highly sound insulating property steel partition or highly cost performance LGS(=light gauge steel) regular wall is normally used.
Floor finishing work
It is a work of sticking on floor finishing materials such as flooring, cushion floor, carpet, tile and so on. For floor finishing work, there are two kinds of work method of 「floor joist work method」 and 「direct sticking work method」, the former is mounting floor joist and isolating floor surface from bedding, while the latter is directly sticking floor finishing material.
As for detached house, floor joist work method is more often used, while direct sticking work method is mainly adopted for shop or store, or office.
Sound insulating work
In the case of studio and the like, considering neighborhood houses and shop or store, sound insulation work may be necessary to carry out. For sound insulating work, checking noise level nearby shop or store first, then carrying out setting countermeasure target value based on nearby control standards. Construction work contractor shall show countermeasure plan based on countermeasure target value and work plan. Soon after the requesting customer agrees on them, the construction work will start.
Summery
Construction work contractors which carry out interior decoration finishing work ought to have already obtained authorized general construction industry license. Full-time technical staffs who have relative Japanese national qualification are on the register.
That is all for today.
On 『Office renewal・shop or store renovation』 interior finishing decoration work・restoration work and so on, if you are in trouble or worried, please feel free to give us your inquiry in the first place.
We are waiting for your follow up of our Instagram, Twitter, and Facebook.
From price offer to construction finishing decoration work, our company is directly managing by ourselves, so we are supplying more reasonable and high quality and good products to you.
～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★
★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★
Our address: 〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo
Free phone: 0120-978-226
～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～
Hello！We are Office restoration Dot.Com. website.
We are doing construction finishing work of 「Interior finishing work」「Interior restoration work」mainly at Ikebukuro area, and also in all over Kanto area, for you.
This time, wear explaining，
Difference between gypsum board and calcium silicate board.
Picked up from the following total index:
1 Difference between gypsum board and calcium silicate board
1.1 Gypsum board
1.2 Calcium silicate board
1.3 Difference between gypsum board and calcium silicate board
Gypsum board
石膏ボード施工中の様子
Situation under gypsum board construction work.
As the name itself describes, it is made of gypsum as its raw material. On its core material, base-sheet(paper) is absorbed and attached to gypsum. It mainly excels fire resistant property. When gypsum board touches fire or heat, gypsum is slowly evaporated and becomes steam. There is a property of keeping the same temperature until complete emission.
This is a reason for excelling in fire resistant property.
As for gypsum board, we already explained before. If you would like it, kindly refer to that.
Calcium silicate board
化粧ケイカル板施工の様子
Situation of calcium silicate decorative board construction work.
The official name is,
Calcium silicate board.
As the name itself describes, it is made of calcium silicate as its raw material. In details, it is made of siliceous raw material, hydrated lime, pulp and others. It is made by crystallization with high temperature・high pressure.
Therefore, it excels in bending strength and water resisting property. There is little crook and shrink with moisture. So, it is often used for construction work at kitchen and toilet in areas often using water.
However, as calcium silicate board itself does not have enough water resisting property against rain and wind, it seems that「calcium silicate decorative board」painted high performance plastic paint or durable sheet sticked with better strength and appearance seems to be used often.
As variation of calcium silicate decorative board is abundant depending on manufacturers, it is used for various places such as general residence・food and drinking place・dealing in medicine company and the like.
We do not further refer in detail here.
Difference between gypsum board and calcium silicate board
Either is standard as interior finishing material. What in the world is different?
The differences besides materials are as follows:
・Calcium silicate board is better on water resisting property.
・Gypsum board is better on cost phase.
・Calcium silicate board is better on bend resistance(≒harder), but when using thinner one, calcium silicate board is more easy to be broken.
Above can be pointed out,
Including restoration construction work and the like, if you are considering interior finishing work, kindly let us know your image of 「want to make the atmosphere like this picture」「want to use as〇〇」or the like.
We will surely supply our service according to your request.
That is all for this time.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Surely including repair work, painting work at ceiling or wall, your new opening of shop or store, renewal, please be sure to take counsel to Office Dot Com website light heartedly.
We are waiting for your follow up of Instagram, Twitter, and Facebook.
From price offer to construction work finishing, our company is directly managing by ourselves, so we are supplying more reasonable and high quality and good products to you.
Of course, we do not mind at all if you compare our quotation with others.
「Which company should I ask for construction work? How much is approximate cost?」and so on. Also besides all above, we are waiting for your relative questions.
『Moving of your office, shop or store, warehouse』, restoration work, reform work(interior finishing decorative work), and so on.
In the first place, please give us relative inquiry.
～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★
★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★
Our address: 〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo
Free phone: 0120-978-226
～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～
Hello！We are Office restoration Dot.Com. website.
We are doing construction finishing work of 「Interior finishing work」「Interior restoration work」mainly starting from Ikebukuro area, and now also in all over Kanto area, for you.
At 5 am today, as outside temperature was too cold, my hands and ears have all turned red, and hardened. It is already midwinter, isn’t it?
Today, the following pictures are construction operation work scenes atsite where we are working lately.
Starting from LGS（=light gauge steel） operation work, sticking plaster board, and others, we are doing interior finishing work.
In the first place, after doing frame work at ceiling, we stick on board.
After sticking board, we spread adhesive, and do cloth sticking operation.
The shape is roundish, so the atmosphere seems to become soft, doesn’t it?
We are focusing on the operation of screw driving on the board.
We are doing operation of striking at correct places precisely.
After mounting LGS bedding(LGS or light steel), we mount rodlike material made of light steel as square-block type, and fix it.
After finish making bedding for gypsum board and others to stick on wall, we do operation of sticking on board.
Above is the relay from the operation site.
As for your request of office interior construction work, please leave it to Office restoration Dot Com website.
We will surely supply our service according to your request.
『Office renewal・shop or store renovation』, interior finishing work・restoration work and so on, if you are in trouble or on your mind, please feel free to give us your inquiry in the first place.
We are waiting for your follow up of our Instagram, Twitter, and Facebook.
From price offer to construction work finishing, our company is directly managing by ourselves, so we are supplying more reasonable and high quality and good products to you.
～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★
★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★
Our address: 〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo
Free phone: 0120-978-226
～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～
大家好！我们是办公室修复Dot Com网站。
自从在池袋地区为主，也在关东全域范围内，我们主要在从事『室内装饰施工工事』『室内修复原状施工工事』的单位，为客户服务。
今天，计划快要完毕施工工事的娱乐设施现场照片如下。
除了办公室以外，我们公司也很愿意接受任何地方的室内装饰施工工事要求。
我们现在也在娱乐设施为客户做工事。
光看这些照片，我们的心里不停地扑通扑通兴奋吧。
我们在整个设施做了轻量型钢工事、张贴板材工事、等种种工事。
很期待着工事完成吧！
除了办公室的施工工事以外，我们公司也欢迎为大家做此次的这种工事。
当然包括办公室施工工事，务拜托我们的办公室修复原状Dot Com网站。
按照贵方的要求，我们将要提供优质技术。
『办公室的更新・店铺改装』室内装饰工事・修复原状施工工事等等。
如果贵方有个为难事，首先请随便跟我们查询一下！
我们也等待贵方在Instagram、推特、Facebook的跟进。
从报价到施工完毕，我公司全部都是自己亲自安排工事、 我们正在给客户供应「尽可能便宜的、质量高的好产品」。
～～～～～～～～～～～～～～～～～～～～池袋～～～～～～～～～～～～～～～～～～～～
★如果贵方想找池袋的室内装饰单位，务必来找办公室修复Dot .Com.网站★
★如果贵方想找东京的办公室修复原状工事单位，务必来找办公室修复Dot.Com.网站★
地址: 〒171-0014 东京都丰岛区池袋2-62-10 武藏屋第三楼四层
免费电话: 0120-978-226
～～～～～～～～～～～～～～～～～～室内装饰施工～～～～～～～～～～～～～～～～～～
Hello！We are Office restoration Dot.Com. website.
We are doing construction finishing work of 「Interior finishing work」「Interior restoration work」mainly from Ikebukuro area, and also in all over Kanto area, for you.
Today, the following pictures are at the site planning to be soon completing our work of an amusement facility.
Our company not only is doing construction work at offices, but also at any kinds of place we would receive your work request.
We are also now doing our construction work of amusement facility.
Only watching these pictures, we cannot stop our thrilling feeling, can we?
We did our construction of variety of operation work such as LGS(=light gauge steel) work, board sticking work and others at the whole facility.
We are looking forward to the work completion, aren’t we?
We are also happy to welcome your work request other than offices.
As for including your request of office construction work, Office restoration Dot Com is glad to take care.
We are sure to supply our technical service according to your request.
『Office renewal・shop or store renovation』, interior finishing work・restoration work and so on, if you are in trouble, please feel free to give us your inquiry in the first place.
We are waiting for your follow up of our Instagram, Twitter, and Facebook.
From price offer to construction work finishing, our company is directly managing by ourselves, so we are supplying more reasonable and high quality and good products to you.
～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★
★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★
Our address: 〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo
Free phone: 0120-978-226
～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～
Hello！We are Office restoration Dot.Com. website.
We are doing construction finishing work of 「Interior finishing work」「Interior restoration work」mainly at Ikebukuro area, and also in all over Kanto area, for you.
Today, in association with our company name『Office restoration Dot Com』, we think that we would like to explain office construction work.
The necessary construction work for office work is 【Electric work】・【Air-condition・sanitary work】・【Interior finishing work】・【Prevention work】・【Telephone・LAN work】・【Crime prevention work】and so on.
The work which our company can do for you are【Air-condition・sanitary work】・【Interior finishing work】・【Prevention work】・【Crime prevention】.
Our company main work is 【Interior finishing work】.
Interior fishing work is, completing decoration of floor・wall・ceiling work, and partition work. As for floor, usually it is tile carpet. However, depending on the designs, there may be finished with polyvinyl chloride tile, flooring, tatami mat or so on.
On the wall, we can select to use cloth(wall paper), painting, decorative sheet or so on. Depending on wall kind, office atmosphere varies, so it sems that it is advisable to select materials carefully.
As for partition also, there are closed type, open type, fixed type, movable type and so on. There are a lot of choices. Furthermore, by materials, sound isolating property also differs. The price varies accordingly.
As it seems that there are variety of offices, we would like to upload several pictures for your reference as below.
Office corridor sticked plaster board, door frame work and so on.
Work at a whole office.
The work details are LGS(=light gauge steel) work・board gluing, cloth sticking and so on.
A little bit repair work at an office.
Now measuring height of ceiling at the office.
Peeled off floor mat, size measuring work operation.
Work starting from light gauge steel operation work.
Work of a whole office building.
Variety of work sites related to the office as above.
It is possible for us to respond to every office for interior finishing work・restoration work.
Whether the property is furnished or skeleton, the cost is going to change significantly. As for furnished property, because the former facility or equipment is remained, you do not normally have to spend money from the start. While, as for skeleton property, the situation is only simple framework, so we may designate it as undressed concrete vacant property.
Both of furnished property and skeleton property, either has its merit and demerit. However, judging from the cost point of view, furnished property seems to be more cost cutting.
However, as for skeleton property also, we can cut cost by without dare doing finishing of ceiling and wall, and by extracting feeling of texture. In addition, recently the designs of these kinds have been popular.
Furthermore, if you need to increase the number of rooms, you can reduce budget by using partition. Talking about partition, the variation is abundant, so you can select it according to your purpose and budget.
By using partition, large-scale construction work is not necessary. We can say that the period of influencing normal business operation turns out to be short, which is the merit too.
If you have questions・problems on office construction work, please feel free to give us inquiry.
The staff at the work section of our company will answer to you kindly and politely.
If you are in trouble of『Office renewal・shop or store renovation』, interior finishing work・restoration work and so on, please feel free to give us inquiry in the first place.
We are waiting for your follow up of our Instagram, Twitter, and Facebook.
From price offer to construction work finishing, our company is directly managing by ourselves, so we are supplying more reasonable and high quality and good products to you.
～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～
★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★
★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★
Our address: 〒171-0014 4th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo
Free phone: 0120-978-226
～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～
