カテゴリー別アーカイブ: BLOG【English・中文・한국어】

Hello everyone！We here are Office restoration Dot.Com. website blog.

We are doing decorative finishing construction work professionally of 【Interior decorative finishing work in general】【Restoration work】, based at Ikebukuro, Tokyo, also in all over Kanto area, for you.

If you have any relative request or counsel, we will answer for it anywhere, so please give us your inquiry in the first place light heartedly.

Then, we think of explaining interior decorative construction work a little bit.

Concerning often heard property kinds, there are:

・Furnished property

・Skeleton property

In the first place, furnished property is a kind of property renting under the situation of remaining former rented shop or store equipment or interior decoration. While, skeleton property is a kind of property renting without any interior decoration or equipment.

As for expense in general, skeleton property is higher. However, because of furnished property sometimes also may cost more for necessary additive work for equipment defect or so.  So, it cannot be said which is costly unconditionally.

It is important to grasp and understand merit and demerit of each property and carefully select your property.

Merit of furnished property is,

In the first place, favorable point is, as the property can be used as it is, and necessary construction work period is short, isn’t it?

As for demerit,

The former interior decoration remains as it is, so it may be difficult to change into favorite design(or interior decoration). The former equipment may be old, so it may be still necessary to repair some by yourself, if there is certain defect.

Merit of skeleton property is exactly opposite to furnished property.

You can make your favorite design(or interior decoration) and demolition cost is not necessary at all.

Demerit is, interior construction work expense is costly naturally accordingly and work period is long.

Considering the above situation,

On interior decoration of your new shop or store, not only making ideal design, but also making comfortable staying shop or store design, then it will further lead to cozy shop or store design for your customers’ satisfaction.

As for interior decorative construction work, it is required to be necessary to consider smooth and detailed design for customers’ walking or loitering lines. For that reason, when choosing your property, we recommend you not to compromise, but to cautiously look for agreeable property and select one.

That is all for our explanation today.

On 『newly opening・shop or store modifying decoration』, its interior decorative finishing work・restoration work and so on, if you are in trouble or worried, please feel free to give us your inquiry in the first place.

Please follow up of our Instagram, Twitter, and Facebook light heartedly.

Instagram     Twitter     Facebook   

From price offer up to construction work finishing, our company is directly managing and working by ourselves, so we are aiming to supply「most reasonable, high quality and good products」 to you.

Hello everyone！We here are Office restoration Dot.Com. website blog.

We are doing decorative finishing construction work professionally of 《Interior decorative finishing work》《Restoration work》, mainly at Ikebukuro area , Tokyo, also in all over Kanto area, for you.

Today, we are explaining the word of『LGS』which may be often heard at construction sites.

For those who are working at construction sites, we think that the word may be familiar to you. However, I personally was not very sure about this word very well until checking it. (I have pretended to be know-it-all about this word and have been spending days lazily.(Ashamed smile!)).

I checked well this time.

At first, this LGS↓

Metal in this picture looks like silver colored iron, doesn’t it?

It seems that this 『LGS』 is an abbreviation. The original words are,

Light Gauge Steel

or

Light Gauge Stud.

The meaning is 「light」「standard」「iron frame」, isn’t it?

This LGS is designated the material used for interior decorative work.

The above picture is a light weight shaped steel plate whose thickness is 1.6 mm～4.0 mm or so, and LGS is zinc galvanized 2 mm or so thickness of thin iron plate.

It seems that the cross section shape of C is relatively a lot. There are also groove shaped, mountain shaped, Z shaped and other shaped. It is used at buildings of steel constructed, steel reinforced concrete or so for bedding material of wall and ceiling.

The single material is a rodlike component. There are several kinds of it. Using bis or accessory to fasten it, we go on making and form into variety of complex shape.

Wall and ceiling are made by LGS. Firstly, in the case of wall bedding, roll forming zinc galvanized steel plate, the mounted product is formed by C shape cross section made stringer(=stud), beam(=runner) to set up floor surface and slab surface, spacer to prevent modification of stringer(=stud), and so on.

LGS is sometimes also used for partition wall bedding, which is called partition between light steel to another light steel too. There are sizes from 50 type～ up to100 type. When used as partition wall bedding, it is often called as stud 1, not LGS.

As gypsum board is sticked on LGS, and further sticked wall paper(or cloth), so it is usually invisible.

Ceiling bedding mounted by LGS is called light ceiling.

LGS is mainly used for construction of steel structure reinforced concrete building, However, in recent years, it has been also used for wooden residence.

A big difference between LGS(=light steel structure) and wooden structure is if there is typical wood made crook, curb, or crack, and construction workability is good, or not. So, it is often used for housing apartment, office, shop or store, and so on, for many places.

We explained the point of what is LGS on earth so far as above. Did this let you understand well for your reference?

As our company is receiving a lot of LGS work requests, and our relative construction performance so far is abundant.

If you are looking for construction work contractor which is willing to respond to construction period or so flexibly, we are especially happy to accept your work request in Kanto area, please be sure to consult with our company.

On 『Office renewal・shop or store renewal decoration』and its interior decorative finishing work・restoration work and so on, if you are in trouble or worried, please feel free to give us your inquiry in the first place.

Please follow up of our Instagram, Twitter, and Facebook light heartedly.

Instagram     Twitter     Facebook   

From price offer to construction decorative finishing work, our company is directly managing and working by ourselves, so we are aiming to supply「most reasonable, high quality and good products」 to you.

～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～

★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★

★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★

Our address: 〒171-0014 4^th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo

Free phone: 0120-978-226

～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～

Hello！We are Office restoration Dot.Com. website blog.

Today, we are explaining【marking base line work】.

What is marking base line work?

Is it related to calligraphy using Japanese ink?

We would like to briefly explain to those who do not know about it well.

Marking base line work seems to be considered one of the important operation works to grasp design drawing and actual position. From the start to the end, it is connected with each site, and it is also related to various works.

It is a kind of operation work to write out necessary various base lines for the work on site ground and others.

We will explain especially for those who do not understand base lines,

It is base line to be when dividing measurement, placement and so on for design and processing of building and work piece and others, We measure the size from this line.

Two technical workers cooperate, and the one holds the base point, the other draw the ink line by prolonging the inked thread.

Writing out center line of pillar, wall and others is called 「centering」.

When marking base line work, dipping thread in ink pot and the like, and undip the thread, then you can draw straight line.

There are many kinds of ink pot(=operating tool), for your reference↓

We would like to explain kinds of marking base lines as follows.

・Land marking base line ink: ink to indicate horizontal line to make level standard on each floor.

・Center marking base line core ink: ink to indicate, becoming center place of pillar or wall.

・Return marking base line ink: ink at certain constant distance indicating actual distance(for example 1 m or 0.5 m) when unable to mark on concrete as existing of hindrance.

When marking base line, as for steel structure reinforcement work, concrete formwork, fixture work, metal work and so on, for many kind of works, the design drawing is drawn as actual size.

For this operation work, the right highly precisional positioning in accordance with the design drawing is required.

Nowadays, lightening laser by laser irradiator, the method of marking along the base line is also exercised.

Using laser by laser irradiator, it is easy to check if building pillar・wall・ceiling and others are at right angle and horizontal.

Did you understand above of our explanation even a little?

Marking is a necessary operation work for writing out various base lines.

In the event of making building, marking base line is an important process concerning from the start to the final.

Without exercising this operation accurately, it is impossible to construct the building properly.

When we ask our company staff worker about marking base line, the answer seems that

「In order not to arise base line gap, always be conscious of ‘’accuracy ’’ is the point of going on marking base line well.」.

That is all for our explanation today.

On 『Office renewal・shop or store renewal decoration』and its interior decorative finishing work・restoration work and so on, if you are in trouble or worried, please feel free to give us your inquiry in the first place.

Please follow up of our Instagram, Twitter, and Facebook light heartedly.

Instagram     Twitter     Facebook   

From price offer to construction decorative finishing work, our company is directly managing and working by ourselves, so we are aiming to supply「most reasonable, high quality and good products」 to you.

～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～

★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★

★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★

Our address: 〒171-0014 4^th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo

Free phone: 0120-978-226

～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～

Hello！We are Office restoration Dot.Com. website.

We are doing decorative finishing construction work professionally of 『Interior decorative work』『Restoration work』and the like, mainly at Ikebukuro area, Tokyo, and also in all over Kanto area, for you.

It is the following article continuing from the last time, explaining fire outbreak countermeasures.

Then, it is the main subject about room after fire outbreak.

When you should encounter fire outbreak, what kind of reform construction work is possible varies depending on site situations.

In some cases of repairing work, there may be a possibility not to be able to fully cover the cost of damage, and necessary to consider to reconstruct the building or house.

「Is it possible to restore original situation？」

「Do not know what to do.」

If you should feel uneasy as above, there are two important matters to check!

They are「field survey」and「fire insurance」!

Why they are important, we are explaining one by one, aren’t we?

At first, it is concerning 「asking field survey for professionals」.

Whether it is possible or not for reforming(or renovation) after the building or house encountered fire outbreak, it is very difficult to judge without field survey.

We shall check the following two matters mainly in field survey.

• Damage situation of the building

Determining whether it is possible to reuse certain parts or not.

It is also becoming very important to judge if it is possible to carry out repair method such as reform or renovation explaining later, and what kind of method is suitable.

• Smelling or not after fire extinguishment

At the site of fire outbreak, after the end of fire, a kind of special smell burnt to a crisp of building materials and so on so-called fire smell may remain.

It is said that some people react against even only a little smell nervously, if leaving things as it may greatly affect human body.

If you consider to live in the same house continuously, it is necessary to take away fire smell.

If we hear of 「fire insurance」, it is easy to hold an image that its insurance is for preparing for fire outbreak, isn’t it?

However, there may not be many of you who do not fully grasp and understand until where fire insurance is really compensating, may there?

In order not to panic when necessity happens to arise, it is safe to precisely check in advance.

Basic rule of fire insurance is payment up to actual loss.

That is, it is not possible basically to receive amount of money more than actual loss.

Depending on the contract details of insurance, maximum amount of insurance is decided, and insurance amount only may not actually fully cover the damage cost. Guaranteed limit may be different. So, if you already bought insurance, we suggest you check the details.

When you are buying insurance, we think that you may have decided the compensate scope is whether 「building」,「household property」 or 「both of building and household property」.

In the event of requesting amount of fire insurance, required indispensable item is the picture of house encountered fire outbreak.

When you request fire insurance compensation, if the contractor has ever had work performance applying for fire insurance before, it is an encouraging matter. So, please check if there was this kind of fact before from the contractor when you consider to choose one.

Then, as to reform and renovation, there are not clear definition difference of the two words.

However, in general, 「reform」is repair for building restoration or partly repair decoration at defected place, while「renovation」 means remodeling work for adding new function or value.

In a few words,

Reform=returning to original situation

Renovation=newly remake

There are these kinds of differences as above!

And, for these two, it is not that either is better or worse, either will be changing to be chosen according to the purposes.

Then, which is more recommendable in the corresponding cases, we are going on explaining with checking merit and demerit of reform and renovation.

Reform is an often adopted work when partly repair is necessary case, not a whole building.

【Merit】

・Cost may be relatively diminished, depending on the scale of work.

・Work period is short.

・Able to still live in the site during work too, depending on the scale of the site.

【Demerit】

・「Improved interior traffic line」,「Want to add facility」and so on, it is merit and demerit especially as newly adding value of difficult work scale is limited, isn’t it?

As all these totally considered, it can be probably said that reform is suitable for a case of fire damage situation relatively small.

As for renovation, it is a large scale repair work whose work scale may extend to a whole building.

【Merit】

It is possible to change space into further easier to live in than before by enhancing function such as fire resisting property and earthquake resisting property and so on, or by changing layout.

【Demerit】

・Work cost is relatively high.

・Work period is long.

・Necessary to look for a temporal place to live in, depending on work scale and period.

There is 「skeleton reform」which is also used with the similar meaning as renovation.

Skeleton reform is a kind of work, demolishing almost all except building skeleton such as poles, base and others. It may also be expressed as「full renovation」 or 「skeleton renovation」。

To express just in a few words, it is not too much to say that skeleton reform is a step before full reconstruction, almost newly construction.

Of course, as it may be going to be more costly, understanding that there is a method of re-birth as same as newly construction work of even formerly encountered fire outbreak housing too, it seems that choice is going to be far more wider.

Then, that is all for our explanations today.

On 『Personal residence・office renewal・shop or store repair decoration』and its interior finishing decoration work・restoration work and so on, if you are in trouble or worried, please feel free to give us your inquiry in the first place.

We are waiting for your follow up of our Instagram, Twitter, and Facebook.

Instagram     Twitter     Facebook   

From price offer to construction finishing decoration work, our company is directly managing by ourselves, so we are supplying more reasonable and high quality and good products to you.

～～～～～～～～～～～～～～～～～～～～～～Ikebukuro～～～～～～～～～～～～～～～～～～～～～～

★If you look for interior finishing company in Ikebukuro, ask Office restoration Dot.Com★

★If you also look for office restoration work in Tokyo, ask Office restoration Dot.Com.★

Our address: 〒171-0014 4^th floor, Musashiya No.3 Building, 62-10, 2-chome, Ikebukuro, Toshima, Tokyo

Free phone: 0120-978-226

～～～～～～～～～～～～～～～～～INTERIOR FINISHING COMPANY～～～～～～～～～～～～～～～～～