Hello, everyone！ We here are Office recovery and restoration Dot.Com. website.
Our company office is at Ikebukuro, Toshima ward, Tokyo, and in all over Kanto district, we are an interior decorative construction work contractor, mainly taking charge of Interior decorative finishing construction・Original state recovery and restoration construction for you.
In this website blog, we are explaining various themes of office, while we are sharing construction site examples.
In order for you as a reader to read these articles with pleasure, we would like to supply useful pieces of information to those who are considering to request interior decorative work in the future.
Please take counsel on any kinds of office interior work with us.
The content which we are introducing and explaining this time is a part of「GL construction method」.
On sticking on gypsum board by using GL bond
This time, what we are explaining is not construction site example or construction state, but an actual construction method.
Tiger brand GL bond:： Quoted from Yoshino Gypsum Co.,Ltd. website
Gypsum board is one of widely used materials for interior decorative constriction.
Among them, GL bond has excellent adhesive strength and durability, so, it is effective to stick on gypsum board.
Sticking on gypsum board by using GL bond is, not only able to realize efficient and even finishing result, but also able to enhance durability.
In this article, we are explaining the method of sticking on gypsum bord by using GL bond gypsum board and its merits in detail.
GLボンドを使った施工の写真がこちら
The above is a construction picture using GL bond.
We are explaining the feature of GL bond and its usage.
GL bond is an adhesive used for sticking materials such as wood, plywood, gypsum board and so on. It has powerful adhesive strength and durability, so, it is suitable for sticking on gypsum board.
1 Preparing backing
Cleaning the wall surface, and neaten even state. If necessary, carrying on backing treatment.
2 Applying GL bond
Applying GL bond on the back side of gypsum board evenly.
Please be sure to use suitable GL bond amount, and applying it with uniformity as much as possible.
3 Sticking on gypsum board
Sticking applied GL bond surface and wall surface firmly, and sticking to gypsum board.
Then, pressing with suitable power, and securing even adhesiveness.
4 Drying and finishing treatment
After sticking on it, waiting until drying GL bond completely.
After that, doing joint treatment and finishing on the surface.
Joint treatment is, a process of treating crack, dent and so on at the gypsum board junction part in gypsum board sticking.
Gypsum board is not used as a big board, but by sticking plural board together to match the necessary size, the wall surface and ceiling are formed.
In order to fill the joint part and gap, to realize uniform and beautiful finishing, joint treatment is duly done.
Joint treatment is, an important process for neatly finishing the joint part of gypsum board in GL work method.
We are explaining the procedure of general joint treatment as follows:
1.Sticking joint tape
Sticking joint tape at the joint part of gypsum board.
Joint tape, plays a role of preventing crack, and enforcing joint part.
Let us stick the tape evenly at all of the joint part.
When sticking the tape, it is important to do this work operation by pressing the joint part firmly at the same time.
2.Applying joint compound (bond)
After sticking joint tape, filling the tape by using joint compound(bond). Joint compound, plays a role of neatening the surface of gypsum board, and unify the joint part. Let us use wide brush and sponge, and applying it to spread compound evenly.
3.Drying compound
Waiting for joint compound to be fully dried.
Let us confirm the drying time according to the product instruction.
If you want to shorten the drying time, it is possible to heat it or to use drying devise to shorten the time.
4.Sanding(polishing)
In order to smoothen the dried joint compound finishing, using sanding with sandpaper or sand sponge.
Getting rid of unnecessary 凹凸and surface roughness, neatening the joint part to even state.
After sanding, let us clean the wall surface with vacuum machine and cloth.
The above is a general procedure of joint treatment.
However, as to the concrete procedure and material usage, they may differ, depending on the site situation and construction condition sometimes.
We propose you to take counsel with a professional interior decorative contractor, and request to do a suitable joint treatment.
The picture to stick on gypsum board
・Firm adhesive strength
GL bond has excellent adhesive strength, and it firmly fixes gypsum board on the wall surface.
・Enhancing durability
Gluing with GL bond is excellent in durability, so, it protects long-term peeling and floating up of gypsum board.
・Efficient construction
By using GL bond, sticking on gypsum board work operation can be done quicky and smoothly.
・A suitable backing treatment is important. Let us clean up the wall surface and make it even politely.
・A suitable applying amount of GL bond and evenly applying are necessary. Let us carry on work operation according to the instruction, and strive to stick it on the board evenly.
If necessary, we recommend you to get an expert advice and guidance.
Sticking on gypsum board by using GL bond is, an important method on pursuing efficiency and durability in interior decorative work.
Because of the strong adhesiveness and durability, it prevents peeling and floating up of gypsum board, so, it keeps long-term beautiful finishing result.
While doing right method and suitable construction, let us stick on gypsum board by using GL bond. As the result, it may realize interior decorative finishing which excels in durability.
Your request・inquiry from here.
If you are interested or have request in interior decorative finishing work, please give us your inquiry light heartedly.
We will propose the most suitable planning and construction to match your requirement and budget.
An original state recovery and restoration construction site example using GL work method is here
～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～～
If you are considering to request office building・tenant(shop or store) original state recovery and restoration work, moving in work, relocation, removal, reform work, and so on, please be sure to contact our company light heartedly!
You can also give us your inquiry from SNS social media. Please see them together by all means!
From price quotation up to construction work completion, our company is directly managing and doing construction work by ourselves.
Our aim is, supplying
「reasonable construction work as much as possible, and high quality, better work service」to our customers.
◆If you look for interior decorative work・original state recovery and restoration work at Ikebukuro, please just look for Office recovery and restoration Dot.Com.◆
Address: 〒171-0014
4th floor, Musashiya No.3 Building
62-10, 2-chome, Ikebukuro, Toshima ward, Tokyo
Free phone: 0120-978-226
